MPC focus learnmarginadjust Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 This is an adjustment made to the nominal focus learn margin. This margin determines the minimum distance that the carriage is positioned from the edge of the plate for learning focus. The nominal margin is 2500 microns if focus learn is performed over two swaths, and 5000 microns if focus learn is performed over only one swath. Note that the net focus learn margin also includes an adjustment for plate rotation. This parameter should only be used if the plates being used at the site have exceptionally large curl near the edges, or are greatly out-of-square. If a large number of focus learn failures are occurring, then increase this parameter. This parameter is available.

0 [microns]

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

27-Feb-2004 Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:24:04 2008 PST